Overview
When purchasing digital resources & software, the software requester needs to request accessibility documentation from the vendor. Campus Reviewers need to review the vendor's accessibility documents and document the level of compliance.
This hour-long TBR Recorded Webinar demonstrates how to review accessibility documents as part of the procurement process.
Step 1: Confirm all Required Documents are Available
Faculty or Staff procuring the digital content is responsible for connecting with vendors to get the accessibility documentation and doing a cursory review of the VPAT and Conformance and Remediation Form (C&R Form) to see (generally) if it meets the criteria. If they decided to proceed with the purchase, then a campus reviewer needs to vet the accessibility documents.
Start by looking at the documents the Requestor has gathered.
- Is there a completed VPAT that aligns to the WCAG A & AA 2.1 standards?
- Is there any item on the WCAG 2.1 list of standards that is listed as "Partially Supported" or "Not Supported"?
- Yes - Confirm that there is also a Conformance and Remediation form included in the accessibility documents. If the C&R form is missing, communicate with the requestor that the documents they provided don't meet the requirements. Refer the requestor to this helpful resource- Requesting Accessibility Documentation & Creating Alternate Access Plans
- No - Really look at the VPAT to access its trustworthiness. If you have concerns about the currency(up to date) or completeness of the VPAT, work with the requestor on communicating the concerns with the vendor. If the VPAT is current and indicates conformance, you can continue with the process without a C&R from.
Step 2: Review the VPAT and Conformance and Remediation Form
Step 2a - Review the VPAT
Review the VPAT and record results on a WCAG 2.1 checklist (click to download document) .
Are each of the standards (WCAG 2.1 Level A and AA) listed on the VPAT?
- Yes - On the checklist, note all non-conformant and partially conformant standards.
- No - On the checklist, mark the ones missing as non-conformant and note that they are missing.
Step 2b - Review the Conformance & Remediation form
Are all the non-conformant and partially conformant issues on the Conformance and Remediation form?
- Yes - Complete the Accessibility section of the Risk Assessment form (likely this form or a link to it will be sent to you by Suzanne in IT). If the material is not fully conformant, be sure to include the fact that they will need to create an Alternate Access plan to address any non-conformance issues.
- No - Send an email to the requestor explaining why the C&R form provided is not sufficient. Alert the requestor that they need to communicate the concerns with the vendor. Refer the requestor to this helpful resource- Requesting Accessibility Documentation & Creating Alternate Access Plans
Step 3: Send Documents to IT to Process for Signatures and Procurement
To move forward with purchasing, IT needs the Risk Review form with the Accessibility and the top general information section completed.
- Send Suzanne Davidson a link to the Risk Review for this purchase. You should ensure that the top section is filled out by the requestor and you complete the accessibility section. Suzanne will have Peter Anderson complete the Data portion of the Risk Review and then route the document for signatures. Suzanne will put a copy of the signed risk review in the vendors accessibility documentation folder.
- If an alternate action plan is needed, send the completed WCAG 2.1 checklist to the requestor.
Let them know that the checklist along with the VPAT and C&R form provided by the vendor should be the basis for their alternate access plan. Tell the requestor they need complete the Alternate Access Plan. Once it has been completed and signed by their Dean and Dr. Yarbrough, the requestor should upload the signed document to the vendors accessibility documentation folder.
Step 4: Upload any new or updated documents to the AIMT Database
You will now need to upload the gathered and created accessibility documents to the AIMT database. Even if the requestor decides not to purchase the item, please still upload all the materials you have gathered into the AIMT database.
This 45-minute TBR recording demonstrates how to upload documents in the AIMT Database
The following documents are required to upload:
Gathered by the Requestor:
- VPAT
- Accessibility Statement (this is a recommended but not required document)
- Conformance and Remediation Form - Required if not all criteria pass WCAG 2.1 A & AA
Completed by You:
- The WCAG 2.1 Checklist for this software/digital content.
Created by the Requestor after receiving the WCAG 2.1 checklist and Risk Assessment form:
- Alternative Access Plan (from institution)